2 Years' Warranty!Reliable Quality!
DH-300X DahoMeter Density Testing Machine, Density Tester, Electronic Hydrometer for Solids, Liquids, Powder
------Simple operation,Data disply, Resolution 0.001 g/cm3
Standards:According to the ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183,GB/T11540,GB/T12206,GB/T5518 standards etc.
DH-300X is the most popular solid and liquid densimeter now; Professional measurement accessories and high transparent completed injection moulding tank have been equiped for solid density.which can resist wear,fall off and corrode; Stainless steel measurement frame and standard volume crystal ball have been equiped for liquid density,whose features are hommization,shorter measuring time,simple operation,stable and accurate; It is suitable for the field of quality management,cost control,new formula researching and material studying and so on. DH-300X can be applied to measure the density of general solid material and plastic particle.Also,it is appropriate for powder and liquid.
Specifications:
Density resolution: 0.001 g/cm3
Maximum weight:300g
Minimum weight: 0.005g/0.01g
Measurement range: 0.001-99.999g/cm3
Features :
- Display the density of solid and liquid quickly,simple operation and stable performance.
- Function of automatic zero tracking,buzzer warning,and overload warning.
- Function of actual water temperature compensation,adapt to the environmental change.
- Function of solution compensation;either water or liquid can be used as medium.
- Adopt the completed high-capacity measurement accessories with the transparent injection mould tank,which can resist wear,fall off,and corrosion.
- Density value can be showed by one procedure for liquid densimeter.and repeatedly continuous rapid measurement can be worked.
- Take samples conveniently.50CC would be okay.
- Coordinate with the operation of thermostatic tank to measure the proportion with the required temperature.
- It is very easy to clean the measurement cup,can’t get the limitation of the size of pycnometer caliber.
- Adopt the completed special windproof and dustproof cover,which makes the combination convenient and durable.
- Volatile liquid,corrosivity liquid,vicidity liquid,strong acid and strong lye liquid can be measured quickly.
- Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with instrument.
Measurement Procedure of Solid Model:
- Place sample on test board to measure weight in air,and then press ENTER button to memory.
- Place sample into water to measure weight in water,and then press ENTER button to memory.The density value is displayed.
Measurement Procedure of Solid Model:
- Place beaker samples on test board.deduct weight of pothook.
- Make standard weight hanged on pothook and submerged in liquid to be test totally.and then press ENTER button to memory.Density valuve will be displayed.
Product Show:
Standard Accessories:
Host,tank,test board,tweezer,thermometer,100G weight,wind and dust cover,a set of measuring floating body parts ,power transformer,DE-20A standard liquid measurement
| brand |
DAHOMETER |
| model |
Economy DH-300X |
|
Density
resolution
|
0.001 g/cm3 |
| Weight range |
0.005~300g |
| Density range |
0.001—99.999g/cm3 |
|
Solid
mode
|
Measurement
solid type
|
Density of any form solid:metal,rubber,plastic and particle,film,floating
body,powder,foaming,heavy body,structure,tubing,panel,wood,sponge,glass.
|
| Measurement model |
Archimedes principle general solid test method |
| Measurement time |
about 5 seconds |
| Memory way |
two procedures |
| Specific gravity measurement frame |
unicase injection forming professional specific gravity mesaturement frame
(size:length13.5mm×wide5mm×high11.6mm)
|
| Measurement tank |
unicase injection forming transparent professional measurement tank
(size:length16.9mm×wide9.8mm×high8.3mm)
|
| Result disply |
Disply according to the model:density,specific gravity,apparent density,volume density,wet density,total porosity,effective porosity,oil content,water absorption,wear loss,wear index,expansibility,volume and so on. |
| Funtion setting |
Water temperature setting,density setting of medium of comparative solution,density setting of medium of waterproofing treatment ,boung setting,aerostatic buoyancy setting,
Loss value setting of fixed weight of reference glue,loss value setting of weight of reference glue,density setting of reference glue.
|
|
Mixed
material percentage
|
Function introduction |
automatically read the percentage of the main material in the two kinds of mixed materials |
| setting |
freely set the density value of main material and subordinate material |
| disply |
density value,percentage of main material |
|
Liquid
mode
|
Measurement type |
a:mobility liquid,vicidity liquid,volatile liquid,corrosivity liquid,high temperature liquid,suspension liquid,emulsion and so on.
b:alcohol,scaling
powder,essence,blood,sodium chloride,glycerol,electrolyte,diesel,refrigerating,hydrofluoric
acid,dichloromethane,vitriol
|
| Measurement principle |
Archimedes principle displacement method |
|
Measurement
mode
|
1 group |
| Measurement time |
about 5 seconds |
| Memory mode |
memory in shorter time by one procedure |
| Result disply |
density |
|
Specific
Gravity
Measurement
frame
|
stainless steel specific gravity measurement frame |
| Function setting |
Temperature setting,density setting, measurement weights setting of standard sensor ball and weights setting in the water |
|
Measurement
testing
|
distilled testing |
|
Calibration
mode
|
auto correction with one button,auto detection. |
| Output mode |
standard interface of RS-232,output and
Print testing data conveniently
|
| Standard accessories |
Host,tank,test board,tweezers,thermometer,100G weight,wind and dust cover,a set of measuring floating body parts ,power transformer,DE-20A standard liquid measurement assembly |
| Optional accessories |
DE-40 printer,DE-20B anti corrosive liquid measurement assembly |
| power |
AC100V - 240V |
| Main feature |
data displaying,accuracy,speediness,convenience
Durable,economy
|
